X-Truder Dual print head launching now

Over the last 2.5 years, I've CAD'd/fab'd up a lot of 3D printer ideas, from heads to complete printers.
I've focused on a dual head for some time and think it's ready.

I wish there had been more time/money to send out a bunch of these for beta-testing, but there wasn't.

Please support if you can, and we'll attempt to answer questions as they come in.

Also, if you are an OEM and want to talk about a custom solution, please contact us.

Dave

Edited 2 time(s). Last edit at 10/31/2014 04:14PM by davew_tx.

Now we are live!

Kickstarter

Interesting design. The minimum level is a little rich for my blood currently, but I'm keeping an eye on it for future reference.

It turns out more expensive than we wanted, but the costs added up. The early birds are sold at a loss for us, and after those, we will roll 100% of the profits back towards tooling, until the 400 units pay off everything. We're making the head with magnesium thixo molding, plus secondary ops. Pcbs are heavy copper. The needles are made with several processes. We've come so far and decided to release it and see. We're getting press and it should pick up.