RepRap Parts Lister Error

The RepRap Parts Lister says that one of the components for the RepStrap v1.0 "Seedling" is a Thermoplast Extruder v1.0 [1]. But the RepRap website says to use the later version v1.1 Thermoplast Extruder (at least, that's what's linked at [2]. The Parts Lister should be updated so that people don't buy the wrong parts if they want to put together a Seedling.

(If this is the wrong forum for this comment, please let me know where to address this concern).

[1] [parts.reprap.org]

[2] [reprap.org]

Also:

On the Parts Lister, The "Arudino Based Electronics" and "RepRap v1.0 "Darwin"" currently use the "Opto Endstop v1.0". They should instead use the v2.1.

Just a note:
you no longer sell some of the pcbs at the Rep rap Research foundation store.
not shur what to buy:

im guessing the replacement for the stepper tester is the "Stepper Motor Driver v2.2 Raw PCB" but it could also be the "Stepper Motor Driver v2.3-r1 Raw PCB"

Also i cant find a new version of the universal controller v1.2 PCB (is it the rep rap motherboard v1.1?)

really hope i can figure this out [forums.reprap.org]