I can do bigger stuff too! November 12, 2015 06:58AM |
Registered: 10 years ago Posts: 541 |
Slicer: Cura-15.02.1 (fedora does not yet have 15.04) Layer height: 0.2mm mostly. Fingertips are 0.15mm Perimeters: 0.8mm mostly. Palm and Gauntlet are 1.2mm to allow holes to be tapped Print speed: 40mm/s Travel speed: 150mm/s Retraction: 1.5mm at 40mm/s Extruder temperature: 185C Heated bed temperature: 70C Cooling: Fan on 100% after first layer Bed preparation: Cleaned with Pure White VinegarThe photographs show the hand assembled with parts directly from the printer bed without clean-up. The assembly pins pushed nicely into the holes with little effort and all of the joints move freely. The Mendel90 did a nice job!
Re: I can do bigger stuff too! November 12, 2015 06:20PM |
Admin Registered: 17 years ago Posts: 7,879 |
Re: I can do bigger stuff too! November 13, 2015 02:59AM |
Registered: 10 years ago Posts: 541 |