Hello,
I decided to upgrade my Firmware in preperation of receiving a PT 100 for my E3D Hot End.
I am using a Makergear M2 with Rambo and after switching from 0.91 to 0.92 I noticed that the standard Motor Current is now 55 in 0.92.
In earlier versions and I believe in the original marlin firmware for the M2 it is 135.
With 135 the stepper sound horrible so I went with 55 for now.
Does anybody now if the scaling was changed from 0-255 to 0-100 or something like that?
regards
Lukas
