I need Firmware for Irapid Black

I need the Irapid Black Firmware.

I did a mistake and flashed my Irapid Black with the cura Firmware.

Can anybody help me? Has anybody the settings so i can flash it myself? I guess it is repetier firmware but can also be marlin or sprinter???

thanks for any help.

best greetings.

German:

Ich wollte nen bisschen rumprobieren und mal was mit cura drucken...sah auch so aus als ob das alles läuft (verbindung konnte hergestellt werden port, baudrate etc.), dann kam so ne art pop up mit der Ansage wenn sie updaten können sie alle funktionen nutzen.... also hab ich das gemacht, was dazu führte das der drucker plötzlich laut piepte und anscheinend die komplette firmware gelöscht hat.

Ask Hakan at irapid for the sources. They contain some modifications over the original firmware (other menus, correct definitions of all parameter). But in general it is the 0.91 Rev 4 from the online configurator with some modifications.

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!

OK, thanks a lot,
i thought someone has the settings in the hand, but knowing 0.91 Rev 4 is already really useful!
i will contact hakan also.

In case you havent got it by now:

[www.irapid.de]

In software at the bottom is the download for the latest version.

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!

Thank you very much!!!
I have not seen it ...

Hallo zusammen ich habe ausversehen bein board vom irapid black formatiert,hat von euch noch jemand evtl das eeprom mit firmware? vielen dank im vorraus mfg kevin

Hi, does somebody still have the original firmware from irapid? The Company seems not to exist anymore.

Use the online config tool. It is a quite standard approach they use:

- RAMPS 1.4 board
- Epcos thermistors I think
- Motor steps/accelerations can be read from eeprom
- Display is Reprapdiscount smart controller

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!

Thanks! I think this will be a good idea

Hello,
can you send me settings for EEPROM iRapid Black (Config->Firmware EEPROM Configuration) please?
Something with my is not all right.
Thanks a lot.

my Settings from EEPROM

<?xml version="1.0" encoding="utf-8"?>BaudrateFilament printedPrinter activeMax. inactive timeStop stepper after inactivityX-axis steps per mmY-axis steps per mmZ-axis steps per mmX-axis max. feedrateY-axis max. feedrateZ-axis max. feedrateX-axis homing feedrateY-axis homing feedrateZ-axis homing feedrateMax. jerkMax. Z-jerkX home posY home posZ home posX max lengthY max lengthZ max lengthX-axis accelerationY-axis accelerationZ-axis accelerationX-axis travel accelerationY-axis travel accelerationZ-axis travel accelerationAutolevel active (1/0)Extr.1 steps per mmExtr.1 max. feedrateExtr.1 start feedrateExtr.1 accelerationExtr.1 heat managerExtr.1 PID drive maxExtr.1 PID drive minExtr.1 PID P-gain/dead-timeExtr.1 PID I-gainExtr.1 PID D-gainExtr.1 PID max valueExtr.1 X-offsetExtr.1 Y-offsetExtr.1 temp. stabilize timeExtr.1 temp. for retraction when heatingExtr.1 distance to retract when heatingExtr.1 extruder cooler speed

missing z steps rattle´s and nothing (Spring is OK)
can ervery body help

I have it only the extruder direction is wrong....