Welcome! Log In Create A New Profile

Advanced

Combine infill every [1] layers - bug or feature ?

Posted by Andke 
Combine infill every [1] layers - bug or feature ?
March 16, 2018 11:45PM
So I enabled "Combine infill every [1] layers" for infill.
to my understanding, every other layer can be skipped.

In reality: (honeycomb infill in an round object)
Stright infill lines are like that, thicker, and every other layer is skipped.
Curved infill lines (outer lines of the infill) are printed every third layer (two skip, then print) , resulting in much too little filament, and they are simply no good.

verion = 1.3.0Dev.26feb.

with cubic infill, every layer is printed..

nor can I disable it (print every infill layer), which messes up my prints.

Edited 2 time(s). Last edit at 03/16/2018 11:54PM by Andke.
Re: Combine infill every [1] layers - bug or feature ?
March 17, 2018 06:54AM
reported as a bug because it happens only for Honeycomb, clearly not intentional.
Sorry, only registered users may post in this forum.

Click here to login