Welcome! Log In Create A New Profile

Advanced

Recommend retract before lift

Posted by Samuel.hk 
Recommend retract before lift
December 18, 2017 07:00AM
My nozzle seems to have leakage, a blob was left every time it lift up. So I adjust the gcode to set retraction before lift and print again, although blob is not totally eliminated but the size already shrink quite a lot.
Re: Recommend retract before lift
December 19, 2017 12:39AM
You could also try " wipe while retracting" to spread the drop onto the surface.
Sorry, only registered users may post in this forum.

Click here to login