Since I'm printing with a diamond hotend, I'm using slic3r and managed to make it work ( more or less )
But what puzzles me is the tool to preset, which extruder tool is used for the different parts of a print ( infill, solid infill, skirt/raft etc )
I've set the skirt/raft extruder to tool 3 from the beginning but it never worked.
Now I tried to print the infill with a different extruder and this sometimes work but sometime doesn't.
To my surprise, the skirt prints different too, when the infill tool change is recognized by the slicer.
What am I doing wrong, that it works one day, but not the other?
Edited 2 time(s). Last edit at 12/03/2016 06:47AM by o_lampe.