Slic3r 1.1.7 slic3r-console.exe does not work, slic3r.exe does

Hi there!

There seems to be a difference between slic3r.exe and slic3r-console.exe. The console version does not work for me trying to slice a file:

C:\slicing\slic3r\Slic3r-1-1-7>slic3r-console.exe c:\slicing\done\w001_thumb_lr_UPL.stl --print-center 100,100 --load c:\slicing\configs\pla-n035-fine.ini --output c:\slicing\testerle.gcode
=> Processing triangulated mesh
No layers were detected. You might want to repair your STL file(s) or check their size and retry.

Removing the "-console" results in a working slicing. The code is generated properly.
C:\slicing\slic3r\Slic3r-1-1-7>slic3r.exe c:\slicing\done\w001_thumb_lr_UPL.stl --print-center 100,100 --load c:\slicing\configs\pla-n035-fine.ini --output c:\slicing\testerle.gcode

Is that a bug or am I just using the slic3r-console.exe wrong? Or is a parameter missing? The used stl file is attached.

Thanks for your answers!

Greetings, Christopher

I have the same problem.

currently slic3r-console is broken for 1.17 1.2 and 1.21

i've put it in as a issue on github but so far nothing has happened, i would recommend going back to slic3r 9.8 as the slic3r-console part still worked in that version
i would have thought such a critical function would have been sorted out pretty quickly

---

-=( blog )=- -=( thingiverse )=- -=( 3Dindustries )=- -=( Aluhotend - mostly metal hotend)=--=( Facebook )=-