Slic3r and REPetier

Hello there,
I would like to ask for some suggestions about an error I encountered while trying to use Slic3r through REPetier. Both programs are in the latest versions and I'm using Windows 7. Here is a what I get in the error message;

12:46:55.351 :  => Generating perimeters
12:46:55.369 :  Error in function new_from_config_width at src\Flow.cpp:9: Invalid flow height supplied to new_from_config_width()
12:46:55.369 :  	 at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/XS.pm line 126
12:46:55.369 :  	Slic3r::Flow::new_from_width('Slic3r::Flow', 'width', '100%', 'role', 0, 'nozzle_diameter', 0.1, 'layer_height', 0, ...) called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/Print/Region.pm line 54
12:46:55.369 :  	Slic3r:rint::Region::flow('Slic3r:rint::Region=HASH(0x3d056f8)', 0, 0, 0, 1, undef, 'Slic3r:rint::Object=HASH(0x3d00318)') called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/Layer/Region.pm line 52
12:46:55.369 :  	Slic3r::Layer::Region::flow('Slic3r::Layer::Region=HASH(0x398f4e8)', 0) called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/Print/Object.pm line 377
12:46:55.369 :  	Slic3r:rint::Object::make_perimeters('Slic3r:rint::Object=HASH(0x3d00318)') called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/Print.pm line 416
12:46:55.369 :  	Slic3r:rint::__ANON__(0) called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/Print.pm line 388
12:46:55.369 :  	Slic3r:rint::__ANON__(2, 'CODE(0x41c36b0)') called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/Print.pm line 417
12:46:55.369 :  	Slic3r:rint::process('Slic3r:rint=HASH(0x3afd1a8)') called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/Slic3r/Print/Simple.pm line 92
12:46:55.369 :  	Slic3r:rint:imple::export_gcode('Slic3r:rint:imple=HASH(0x3d0b1c8)') called at C:/PROGRA~1/Repetier-Host/Slic3r/lib/std/cavaexecscript/slic3r.pl line 180
12:46:55.370 :  	require cavaexecscript/slic3r.pl called at /Application::Loader line 1469
12:46:55.370 :  	Cava:ack::Code::_run_packaged_script('cavaexecscript/slic3r.pl') called at /Application::Loader line 1496
12:46:55.370 :  	Cava:ack::Code::_run_doscript() called at /Application::Loader line 1558

I'm not positive that I've done everything according to the rules, I hope I didn't mess around too much. I'm afraid I don't know how to remove those smileys...

Thanks for the help and sorry for the inconvenience!

Hi there,
I'm not sure if I made some mistakes, this is the correct place to ask for help in these matters, right? I don't want to be a bother, but I didn't see a "posting guidelines" sticky so I assumed that it was okay to just ask for help.

Thanks

Yup, I am pretty sure you are in the right place! What version of Slic3r are you running?

Can you also please provide the following settings from your configuration:
Nozzle Diameter
Layer Height
Default Extrusion Width
First Layer Extrusion Width
Bridge Flow Ratio

If I understand the output you provided, you have set up a .1mm nozzle diameter and a 0mm layer height. The layer height would certainly be an issue.

I didn't notice that before. The output clearly shows a layer height of 0. That is most assuredly going to cause an issue.

Wahoo! Perhaps I was moderately helpful in my first post!

Edited 1 time(s). Last edit at 09/11/2014 10:26AM by anXofY.

Thanks guys.
I'm using a mUVe, it's a stereolithography machine so the settings are a bit... off, so to speak. I followed the instructions provided as best as I could, but I probably made some mistakes. Anyhow, I'll attach the Slic3r settings, straight from the mUVe site. Please tell me if this is acceptable. Posting the whole thing as a message is a bit unwieldy.

Nevermind, I forgot to save the settings of the first layer. I probably shouldn't have tried the first print at three in the morning.
Welp, I'll leave this post as a reminder to check erverything thrice.

Sorry for the bother!!!

Edited 1 time(s). Last edit at 09/12/2014 04:29AM by crenzi.

No worries! Post of picture of that SL print!