Just tried the experimental 1.1.4 build, and this bug has been solved.
Problem:
If I try to print a part using the 2nd nozzle on my printer only by setting the nozzle setting for all parts of the print to nozzle 2 in print settings, when I slice it, it still enables the first nozzle. This means that it will heat it up for the duration of the print, and if I leave ooze prevention on will even print the ooze shield using the first nozzle, switching nozzles every layer (even though at no time does the 1st nozzle get used in the part).
Temporary workaround:
I have created a filament profile called dummy which I use for the first nozzle. This setting prints at 70C and has 5mm filament with a 0.0001 extrusion multiplier. This essentially prevents any printing of the first filament, but doesn't actually disable it.
Edited 1 time(s). Last edit at 06/13/2014 08:34PM by pyrophreek.
