Welcome! Log In Create A New Profile

Advanced

ABS print stopped in the middle!>*#? HELP

Posted by Marzouk 
ABS print stopped in the middle!>*#? HELP
February 11, 2018 11:35PM
Hi, I'm using the original Prusa with ABS filament . As you see in the picture it's a big print but it messed up in the middle and i stopped it. what do you think is the problem?

note: cooling fan was off.
Attachments:
open | download - WhatsApp Image 2018-02-12 at 9.14.11 AM.jpeg (139 KB)
Re: ABS print stopped in the middle!>*#? HELP
February 12, 2018 02:32AM
Hard to tell from the picture. You don't have a webcam with a timelapse movie of the print, I assume?
My best guess, happened to me once: ABS tends to bend up in corners when cooling during the print, so probably one part of the printed object moved up a little bit, the print head touched it during the print, object got partially broken/hit by the head, and that's the result.
Re: ABS print stopped in the middle!>*#? HELP
February 12, 2018 03:07AM
Hard to tell indeed. This is my version.
I see lots of loose strands. The first cm all was ok then parts got bumped off.
So my guess : layerheight to high(in combination with curled corners)
Sorry, only registered users may post in this forum.

Click here to login