Hi
Have i new build CoreXY that I am starting up.
Did a test print and got the following dimensions:
Hight walls: 8,1 mm
Hight infill (100%) 7,8mm
Should be 7,65 mm.
The outside dimension of the squared block was 29,98 * 30,00.
The walls on the outside is looking god eccept for the corner, should be Sharp but is like its added a radius.
I am using a Chamira dual extruder.
Thanks
Attachments:
open |
download -
20170821_085455.jpg
(131.3 KB)