Welcome! Log In Create A New Profile

Advanced

Difference in printing

Posted by DOYT 
Difference in printing
March 15, 2017 08:03AM
Hi. I just wondering why do I have such an ugly printing on the belly, on the bottom of this frog and why is so nice and smooth on the top? I m using an original e3dv6 full with qualitative pla filament. Print quality 0.1mm 60mm/sec print speed, printing temp 210/55, print fan cooling at 255. The quality on the bottom should be like it is on the top without supports. As slicer, I'm using cura 2.3.0. Opinions? Thanks!
Attachments:
open | download - rsz_2017-03-15_164224.jpg (224 KB)
open | download - rsz_2017-03-15_164257.jpg (187.6 KB)
open | download - rsz_2017-03-15_164407.jpg (97.3 KB)
Re: Difference in printing
March 15, 2017 08:05PM
Lower the temperature to max 195 and try again, also on small objects is best to print slow 40mm/sec max.
It might also help to increase the retraction distance, use random starting point and adjust overlap percentage.

Edited 1 time(s). Last edit at 03/15/2017 08:09PM by ggherbaz.
Re: Difference in printing
March 16, 2017 12:46AM
I have printed this part with 6.5 mm retraction distance, 45mm/s retraction speed 0% infill and printing speed 60mm/sec. I'll do the change and I'll post the differences. Thanks.
Re: Difference in printing
March 16, 2017 03:41AM
The belly is a nasty overhang - very difficult to print.
Re: Difference in printing
March 16, 2017 10:48AM
even with a prusa i3 mk2 original?
Sorry, only registered users may post in this forum.

Click here to login