Hi !!
I printed this model using Cura Slicer engine. I used PLA filament of 1.75dia
providing layer height of .1mm
shell thickness of 1.6mm(even tried for 0.8, 1.2, 2.0 and 2.4) and fill density of 20%(even tried for 40%)
the image attached is without support i also tried with support also i got the same result with much more bad surface finish due to supports.
i really don't know what to do to get a perfect finish for this model that i created.
i even tried generating supports in mesh mixer the strength of the model was reduced and it broke from the second curve.
what i observed in this was that the nozzle was penetrating the formed layers and hence reducing the quality of the finish(even tried by changing cooling time of the layers), those top two curves are chamfer type curves but the printed model is showing them as flat layers and the 2nd curve layers are always distorted(layers are misaligned ).
Please suggest me what to do to get a good finish for this model. !!