New to S3D

Got a Zortrax converted to DuetWifi, and am trying to learn S3D.

Here's some calibration cubes:








ABS
0.4mm extrusion width (manual)
0.3mm layer height
100% infill
Raft print
240degC
1mm retraction at 60mm/sec
.90 and .95 extrusion multiplier (extruder steps/mm accurately calibrated)

Issues would be some under extrusion at the start of each layer that doesn't seem to be related to extrusion multiplier, and funky corners.

Would love some help in dialling this right in please.

Increase your infill overlap and deactivate the wipe function, use random start point.

S3D have too many different functions to try to explain them all, but play with infill extrusion percentage to tweak little details, use the retract between layers and the little gaps fill.