Hello,
This is my hotend:
[
i.ytimg.com]
Nozzle size is 0.5mm
Cura 3d settings:
I'm using RAMPS 1.4 and this is my extruder motor:
[
g01.a.alicdn.com]
This is my configuration file:
[
pastebin.com]
Quote
configuration.h
#define DEFAULT_AXIS_STEPS_PER_UNIT {107.5,107.5,175.0,86.4}
#define DEFAULT_MAX_FEEDRATE {100, 100, 20, 205}
#define DEFAULT_MAX_ACCELERATION {100,100,100,100}
AXIS STEPS PER UNIT for extruder is 86.4 and when I press extrude 1000mm (1000mm/min) in pronterface I got exactly 1 meter extruded filament.
The problem is that when I push filament (by hand) on heated hotend It gets extruded but when It comes to the printing when extruder is working very slowly filament doesn't come out from hotend. I dont use teflon PTFE tube (just regular hydraulic) one and fan to cool radiator. Any sugestions how to fix problem and improve printing process?
[
youtu.be]
Please forgive audio/video quality and poor language skills.
PS Please note that this project is to make just few poor quality printings.
Edited 3 time(s). Last edit at 08/24/2016 03:36PM by JedzieMiZmordy.