Welcome! Log In Create A New Profile

Printing Problem

Posted by noraiman

Forum List Message List New Topic

noraiman

Printing Problem
February 09, 2016 10:16AM

Registered: 8 years ago
Posts: 3

Can someone help me and tell me what is going on with my printing? Really need help

Reply Quote

Attachments:
open | download - IMG-20160206-WA0000.jpeg (553.6 KB)

gebelke

Re: Printing Problem
February 09, 2016 11:21AM

Registered: 9 years ago
Posts: 4

Looks like layer shifting, possibly under extrusion? Probably caused by the toolhead moving too fast, or a mechanical stoppage where a belt is hitting something at a specific layer preventing it from returning to where it should be (excess friction).

See here: [www.simplify3d.com]

Reply Quote

Downunder35m

Re: Printing Problem
February 09, 2016 12:05PM

Registered: 8 years ago
Posts: 778

To me it looks like the machine needs a service winking smiley

IMHO the motor currents are not set correctly causing the loss of steps during fast movements.

Reply Quote

JamesK

Re: Printing Problem
February 09, 2016 02:41PM

Registered: 9 years ago
Posts: 1,873

Lots of possible causes: [reprap.org]

Reply Quote

noraiman

Re: Printing Problem
February 10, 2016 01:09AM

Registered: 8 years ago
Posts: 3

Anyway thank you for your response... i change to slice3r and going back to normal. But when i use cura engine the problem comes again.. hhmmmmm.. any idea

Reply Quote

the_digital_dentist

Re: Printing Problem
February 10, 2016 07:28AM

Registered: 11 years ago
Posts: 5,780

Assuming you're checked the machine for obvious mechanical problems such as loose belts, loose pulleys, etc., you are printing too fast or your acceleration and/or jerk settings are too high.