Hello Friends,
I am a beginner for reprap. I made a diy 3d printer.Which specs as follow,
Board:- RAMPS 1.4 with pololulu motor shields
Firmware :- Marlin
Hotend :- Geeetech upgraded single head MK8 extruder Print Head
Heatbed :-Geeetech hotbed heated bed PCB MK2a
Host :- Repertier Host
Slicer :- slic3r
Filament:- 1.75 mm ABS
I have configured each and every settings according to the instructions experts here. I have printed 3D parts easily.
But unfortunately while I am printing suddenly the extruder stops extruding filament.So I checked that nozzle is clogged.I removed the nozzle and clean nozzle with acetone.
I fixed the hot-end again and manually checked whether the filament is extruding.And It was working like charm.
But If I am going to print something extruding completely stops and nozzle is clogging.
I have checked all the extruder settings.Nothing have being changed.
Now I cant print anything.filament extrudes in manual but not while printing.
Please Help me What should I do now ?
Thanks