Bed Autoleveling Problem

Hi everyone,

I'm running a 300x300 printer with RepetierHost 1.0.6, Marlin and Megatronics v3.

Cause the big size of the bed I'm sending a G29 code before every print, using the Grid option with 4 (16) probe points

The problem occurs when I press "Pause" for change the filament, when I restart the print the bed auto leveling doesn't work, so I spoiled every print.

My "Pause" code on RepetierHost provide a G28 X (home x) and G1 Y310 (extruder position for change filament).

Anyone have any idea why every pause I lost the autoleveling?

Is possible the "G28 X" resets data stored?

---

"Never send a human to do a machine's job"

If you run G28 after a G29 it will erase the Z values. But a G28 x only shouldn't besides you meed to move home to change filament. It's your eeprom activated? If so you can try to save the values after G29 with M500 if not mistaken and then give it a try and see if they stay active.

Edited 1 time(s). Last edit at 03/13/2015 02:54PM by ggherbaz.