Please Help me to identify my Problem 
==?
Posted by edisonpaul4
|
Please Help me to identify my Problem ==? January 21, 2015 10:00PM |
Hi! thank you for your attention 
I have been printing a lot, its my second 3D printer, but lately I noticed that my prints are having problems, but I dont know why. Some pictures attached waiting for your help.
Also some extra Information.
-I am printing with PLA High and cheap quality (Both with the same problem)
-190C to 200C with bed temperature of 50C to 70C (I have been trying to print a lot)
-Fan to prevent overheating before the PLA reach the nozzle and another fan to cool down the print...
-Nozzle 0.4... printing at 0.1 resolution.
- its a Prusa i3
I have been printing a lot, its my second 3D printer, but lately I noticed that my prints are having problems, but I dont know why. Some pictures attached waiting for your help.
Also some extra Information.
-I am printing with PLA High and cheap quality (Both with the same problem)
-190C to 200C with bed temperature of 50C to 70C (I have been trying to print a lot)
-Fan to prevent overheating before the PLA reach the nozzle and another fan to cool down the print...
-Nozzle 0.4... printing at 0.1 resolution.
- its a Prusa i3
Sorry, only registered users may post in this forum.