Welcome! Log In Create A New Profile

problem with 128X64 LCD, Prusa i3

Posted by Ron1980

Ron1980

problem with 128X64 LCD, Prusa i3
September 08, 2014 12:56PM

Registered: 9 years ago
Posts: 8

Hey

I am having a problem with 128X64 LCD.
I added #include to the library, uncomment

// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PC cool smiley

// [reprap.org]
//
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: [code.google.com]
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

but nothing shows on the screen, all i see is this

.

IMAG2022_1.jpg

Reply Quote

alvinhochun

Re: problem with 128X64 LCD, Prusa i3
September 09, 2014 02:12AM

Registered: 9 years ago
Posts: 41

Does serial/usb work?

Reply Quote

RDEng

Re: problem with 128X64 LCD, Prusa i3
September 09, 2014 07:37AM

Registered: 10 years ago
Posts: 32

what is your arduino firmware? I'm not sure but sprinter isn't support sd card and lcd screen. Try marvin or repetier.

Edited 1 time(s). Last edit at 09/09/2014 07:38AM by RDEng.

Custom 3D Printer,

Mechanical Engineer

Reply Quote

Ron1980

Re: problem with 128X64 LCD, Prusa i3
September 09, 2014 11:08AM

Registered: 9 years ago
Posts: 8

i tried both marlin and repetier but they are giving me the same screen,

nothing shows up, just blank screen

Reply Quote

Ron1980

Re: problem with 128X64 LCD, Prusa i3
September 09, 2014 11:58AM

Registered: 9 years ago
Posts: 8

Found the problem

the Ramps is damaged, tried new ramp and it worked

Thanks!!

Reply Quote

Ron1980

Re: problem with 128X64 LCD, Prusa i3
September 10, 2014 10:40AM

Registered: 9 years ago
Posts: 8

One problem down and there is a new problem

The screen is working, i see the heatbed, X Y Z. but when i am trying to enter to the menu by pressing on the button it wont do nothing

do i have to change something in the pins.h?

Thanks

Edited 1 time(s). Last edit at 09/10/2014 10:40AM by Ron1980.