Extruder Motor not turning while printing, but works while testing July 21, 2014 09:20AM |
Registered: 9 years ago Posts: 7 |
Re: Extruder Motor not turning while printing, but works while testing July 22, 2014 10:52AM |
Registered: 9 years ago Posts: 15 |
Re: Extruder Motor not turning while printing, but works while testing July 22, 2014 04:27PM |
Registered: 11 years ago Posts: 1,320 |
Re: Extruder Motor not turning while printing, but works while testing July 22, 2014 04:38PM |
Registered: 10 years ago Posts: 581 |
Re: Extruder Motor not turning while printing, but works while testing July 22, 2014 05:34PM |
Registered: 9 years ago Posts: 33 |
Re: Extruder Motor not turning while printing, but works while testing July 22, 2014 05:39PM |
Registered: 9 years ago Posts: 7 |
Re: Extruder Motor not turning while printing, but works while testing July 22, 2014 10:56PM |
Registered: 9 years ago Posts: 33 |
Re: Extruder Motor not turning while printing, but works while testing July 23, 2014 06:57AM |
Registered: 9 years ago Posts: 7 |
Re: Extruder Motor not turning while printing, but works while testing July 23, 2014 11:18AM |
Registered: 9 years ago Posts: 7 |
Re: Extruder Motor not turning while printing, but works while testing July 23, 2014 07:03PM |
Registered: 10 years ago Posts: 581 |
Re: Extruder Motor not turning while printing, but works while testing July 23, 2014 08:05PM |
Registered: 9 years ago Posts: 7 |
Re: Extruder Motor not turning while printing, but works while testing July 24, 2014 01:54AM |
Registered: 10 years ago Posts: 231 |
Re: Extruder Motor not turning while printing, but works while testing July 24, 2014 12:50PM |
Registered: 11 years ago Posts: 1,320 |
Re: Extruder Motor not turning while printing, but works while testing July 24, 2014 10:30PM |
Registered: 9 years ago Posts: 7 |
Re: Extruder Motor not turning while printing, but works while testing July 24, 2014 11:50PM |
Registered: 10 years ago Posts: 231 |
Re: Extruder Motor not turning while printing, but works while testing July 25, 2014 01:25AM |
Registered: 9 years ago Posts: 7 |
Re: Extruder Motor not turning while printing, but works while testing July 25, 2014 02:30AM |
Registered: 10 years ago Posts: 231 |
Quote
Coldstone
That code was written using Repetier Host and Skeinforge for the slicer, I have tried Slicer in Repetier but it errors out and is unusable.
I'm not familiar with this type of slicing, before this I have only used Makerware for my other Flashforge Replicator Clone.
Is there a Stand alone copy of Slicer that I can use to prep the model?
One would think that this would be a common problem, but oh well.
May I ask where in the code I should be looking for the extrusion settings, in order to tell if it's there or not?
G1 X85.576 Y83.731 E1.01695 F1200.000 G1 X87.447 Y82.656 E1.15600 G1 X87.687 Y82.558 E1.17272 G1 X89.693 Y82.027 E1.30645 G1 X89.933 Y81.995 E1.32206 G1 X91.000 Y81.925 E1.39097 G1 X110.055 Y81.994 E2.61900 G1 X110.314 Y82.028 E2.63580 G1 X112.289 Y82.549 E2.76749 G1 X112.532 Y82.647 E2.78435