Welcome! Log In Create A New Profile

Advanced

PTFE tube state

Posted by infodude 
PTFE tube state
March 01, 2013 05:01AM
Here's the tube from inside my J-Head:
and here's inside the bit that points into the hot end:

I'm guessing it looks a little on the rough side. Any suggestions as to what kind of abuse would cause this?

Thanks,
Phil


Mendel iteration 2
J-Head Mk4 (0.5mm & 0.4mm) 3mm sleeve
That head from eBay from Poland (0.3mm)
Wade, Wade's accessible
Re: PTFE tube state
March 03, 2013 05:15AM
Update - this was possibly started when a small ball of metal got stuck in the nozzle!


Mendel iteration 2
J-Head Mk4 (0.5mm & 0.4mm) 3mm sleeve
That head from eBay from Poland (0.3mm)
Wade, Wade's accessible
Re: PTFE tube state
March 14, 2013 02:28PM
Glad you are back up.

see thread on same issue:
[forums.reprap.org]
Sorry, only registered users may post in this forum.

Click here to login