im building a prusa 2 and i am having trouble sourcing the m3 hardware for it. I live in abbotsford and i was hoping that there were some extra parts someone had laying around. hope to get some replies here is a list of what i need.
thanks guys

8x m3 15mm screw w/hex head
2x m3 10mm screw w/hex head
1x m2 25mm screw
2x m3 25mm screw w/hex head
12x m3 nut
1x m3 10mm screw w/float head
2x m3 40mm screw
1x m3 grub screw (set screw)

Edited 1 time(s). Last edit at 03/13/2012 10:25PM by tarethsmen.

I forgot to add I am willing to pay for them. Just figured it was assumed

Edited 1 time(s). Last edit at 03/14/2012 02:45AM by tarethsmen.

Your best bet is to buy a kit online from Mixshop.ca or ebay....sourcing metric parts is tricky locally. Alder Auto and Fastenal should have some of those though.

Edited 1 time(s). Last edit at 03/16/2012 07:03PM by johnbiehler.

---

[johnbiehler.com]

um the place I found metric stuff at in abby was the parts desk at avenue equipment
but sabre or radier or fastenal can get it for you

Ya I ordered everything I need Unfortunatly large quantities. All I am missing is the 40mm screw. I've phones fastnal, sabre, Andrew sherrat, and searched online. Once I figure out what those are for I might Try to jimmi rig something up. If anyone has done this pls let me know if u have a tip.
Thanks
Mike

alderauto has 40mm socket screws in M3 or M4 sizes

---

___________________________________________________
Kreativ-e
Tinkerine Studio

Thanks so much!

Edited 1 time(s). Last edit at 03/30/2012 06:23PM by tarethsmen.