Strange behavior on Y axis June 24, 2017 06:55PM |
Registered: 6 years ago Posts: 17 |
Re: Strange behavior on Y axis June 24, 2017 08:29PM |
Registered: 7 years ago Posts: 45 |
Re: Strange behavior on Y axis June 25, 2017 03:24AM |
Registered: 10 years ago Posts: 14,672 |
Re: Strange behavior on Y axis June 25, 2017 08:25AM |
Registered: 6 years ago Posts: 17 |
Quote
dc42
Most likely your Y axis is missing steps at the start of a travel move. So you need more motor torque or less acceleration.
Those motors are rated at 2.0A, which is almost double the current you can get from most plug-in drivers. So with RAMPS and plug-in drivers, you won't be able to run them close to maximum torque without the driver overheating.. That leaves reducing Y acceleration as your best option. Or switch to a board with integrated drivers that can be cooled properly.
Re: Strange behavior on Y axis June 25, 2017 03:23PM |
Registered: 10 years ago Posts: 14,672 |