Welcome! Log In Create A New Profile

Advanced

Huxley duo with 1.04 firmware: slow movements in print & calibration

Posted by hieronymousch 
Huxley duo with 1.04 firmware: slow movements in print & calibration
April 19, 2015 03:45AM
Hi,

I'm encountering a strange problem that I never had with my ormerod. When calibrating the printer, all axis move at normal speeds but the X-axis returns really slow to the 0 position on the end of the calibration.
I'm having the same problem with the Y axis during a print with several parts at once... it takes ages to move the bed to the new part and then he resumes at normal speed.

What am I missing here? Why is this happening? My config file uses the default settings.

Thanks
Re: Huxley duo with 1.04 firmware: slow movements in print & calibration
June 09, 2015 01:55AM
Update your firmware and SD-Image. The speed was set very low in the homex.g macro in v1.04.

Ian
RepRapPro tech support
Sorry, only registered users may post in this forum.

Click here to login