Megatronics 2.0

Hi all i was just wondering about setting up the jummpers on my Megatronics 2.0 for the stepper drivers dus any 1 now how to do it or a web site or step by step thing. Also how can i tell witch cable to huck in to my lcd and key pad iv hered about them putting the conecters on backwerds any help would be grate thanks

From left to right:
Full step: no | no | no | no
Half step: yes | no | no | no
1/4 step: no | yes | no | no
1/8 step: yes | yes | no | no
1/16 step: yes | yes | yes | no
1/32 step: yes | yes | yes | yes

If you're using an A4988 Pololu then you probably want 1/16.

If your LCD controller did not come with a Megatronics specific adapter board, you can buy it from ebay, search 'lcd adapter board'. Will save you a lot of headache for <$5.

Alternatively you can hookup the individual pins by looking at the schematics for your lcd controller and the megatronics. Check the source in the Wiki.