Hi,
I am kinda perplexed here I want to reprogram my 644p and well I got some 1284p laying around and in the future I might want to put those in service.
Here are the things I need to know
for marlin you usually need a 2.7v brownout fuse, so what fuses need to be set for a 644p and for a 1284p
Also besides the acceleration settings and the steps per mm and my fan pin what else is needed for marlin to work properly with gen7. Sorry for these questions, I know I've done this before it's just been so long.
also am I right that pin 20 on the package is pin 13 19 is 12 and 18 is 11 ? cause from what I see in pics those are the other three pwm's
terramir
Edited 1 time(s). Last edit at 07/03/2014 03:05PM by terramir.
