voltage / resistance readings gen 7 motherboard September 20, 2013 02:25PM |
Registered: 10 years ago Posts: 125 |
Re: voltage / resistance readings gen 7 motherboard September 22, 2013 10:57AM |
Registered: 13 years ago Posts: 7,616 |
Quote
I was doing a few tests for resistance on the board and I noticed that one of the 0.1uf capacitors that feeds the pololus has a different reading to the other three.
Quote
If anyone can supply a list of test values so I can compare I would appreciate it.
Quote
I also noticed on the link below from [reprap.org] that one side of the green jumper is designated as ground and the other side as +5v. Now, correct me if I am wrong but wouldn't jumping this connection cause a short?
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: voltage / resistance readings gen 7 motherboard September 27, 2013 05:18AM |
Registered: 10 years ago Posts: 125 |
Re: voltage / resistance readings gen 7 motherboard September 28, 2013 06:23AM |
Registered: 13 years ago Posts: 7,616 |
Quote
I just assumed that as all 4 drivers did the same thing that the readings on the board would be the same between the 4 pololus.
Generation 7 Electronics | Teacup Firmware | RepRap DIY |