Erratic Heatbed Temperatures Gen 7 1.3.1 July 04, 2012 04:29PM |
Registered: 12 years ago Posts: 49 |
Re: Erratic Heatbed Temperatures Gen 7 1.3.1 July 05, 2012 04:53AM |
Registered: 13 years ago Posts: 7,616 |
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: Erratic Heatbed Temperatures Gen 7 1.3.1 July 07, 2012 10:10AM |
Registered: 12 years ago Posts: 49 |
From Printed Parts |
From Printed Parts |
From Printed Parts |
Re: Erratic Heatbed Temperatures Gen 7 1.3.1 July 07, 2012 05:36PM |
Registered: 13 years ago Posts: 7,616 |
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: Erratic Heatbed Temperatures Gen 7 1.3.1 July 08, 2012 07:28AM |
Registered: 12 years ago Posts: 49 |
Re: Erratic Heatbed Temperatures Gen 7 1.3.1 July 09, 2012 08:01AM |
Registered: 13 years ago Posts: 7,616 |
Quote
Also I am currently using the Repetier Firmware, which has not been altered at all since well before the problem started!
Quote
I don't think the problem lies with the software/firmware!
Quote
Would I be right in thinking the problem (electronics wise) could only be the ATmega (not signalling), resistors (connecting to the MOSFET) or the MOSFET? I will have to investigate the tracks with my multi meter.
Quote
Also am I right in thinking you are suggesting I make a direct connection from the +5V to pin 30 and cut the track that feeds the ATmega?
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: Erratic Heatbed Temperatures Gen 7 1.3.1 July 09, 2012 04:36PM |
Registered: 12 years ago Posts: 49 |
From Printed Parts |
Re: Erratic Heatbed Temperatures Gen 7 1.3.1 July 10, 2012 06:37AM |
Registered: 13 years ago Posts: 7,616 |
Generation 7 Electronics | Teacup Firmware | RepRap DIY |