okies nothing but sample works March 15, 2012 07:54PM |
Registered: 12 years ago Posts: 279 |
avrdude -p atmega644P -C C:\arduino-0023\hardware\tools\avr\etc\avrdude.conf -c dapa -P lpt1 -U lfuse:w:0xF7:m -U hfuse:w:0xDC:m -U efuse:w:0xFC:m avrdude -p m644P -C C:\arduino-0023\hardware\tools\avr\etc\avrdude.conf -c dapa -P lpt1 -U flash:w:bootloader644p20MHz.hexthat succeeds I upload the test firmware and that works too, however since I have one of those cp2102 modules I have to then wipe the firmware with the one above. I figured out I have to plug in the molex connectors as well for the led to blink doh)
Re: okies nothing but sample works March 16, 2012 07:17AM |
Admin Registered: 12 years ago Posts: 2,569 |
Re: okies nothing but sample works March 16, 2012 08:59AM |
Registered: 13 years ago Posts: 7,616 |
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: okies nothing but sample works March 16, 2012 05:08PM |
Registered: 12 years ago Posts: 279 |