Anycubic kossel extruding in the air February 23, 2018 11:55AM |
Registered: 6 years ago Posts: 1 |
Re: Anycubic kossel extruding in the air February 24, 2018 02:54PM |
Registered: 6 years ago Posts: 9 |
Re: Anycubic kossel extruding in the air March 05, 2018 03:09AM |
Registered: 6 years ago Posts: 38 |
Re: Anycubic kossel extruding in the air March 05, 2018 03:58AM |
Registered: 6 years ago Posts: 9 |
#define DELTA_HEIGHT 284.9 // get this value from auto calibrate <- ONLY ALU-HOTBED with sticker - NO GLASS PLATE #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate // Center-to-center distance of the holes in the diagonal push rods. #define DELTA_DIAGONAL_ROD 268.0 // mm // Horizontal offset from middle of printer to smooth rod center. #define DELTA_SMOOTH_ROD_OFFSET 186.0 // mm // Horizontal offset of the universal joints on the end effector. #define DELTA_EFFECTOR_OFFSET 31.0 // mm // Horizontal offset of the universal joints on the carriages. #define DELTA_CARRIAGE_OFFSET 20.6 // mm // Horizontal distance bridged by diagonal push rods when effector is centered. #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) //mm Get this value from auto calibrate
Re: Anycubic kossel extruding in the air July 12, 2018 09:54PM |
Registered: 5 years ago Posts: 1 |
Re: Anycubic kossel extruding in the air July 13, 2018 02:46AM |
Registered: 6 years ago Posts: 9 |