Delta calibration issues November 19, 2016 06:02AM |
Registered: 8 years ago Posts: 66 |
Re: Delta calibration issues November 19, 2016 09:01AM |
Registered: 8 years ago Posts: 916 |
Re: Delta calibration issues November 19, 2016 07:10PM |
Registered: 8 years ago Posts: 3,525 |
Re: Delta calibration issues November 27, 2016 01:52PM |
Registered: 7 years ago Posts: 4 |
Re: Delta calibration issues November 28, 2016 03:34PM |
Registered: 10 years ago Posts: 97 |
Re: Delta calibration issues November 28, 2016 10:03PM |
Registered: 7 years ago Posts: 4 |
Re: Delta calibration issues November 29, 2016 10:15AM |
Registered: 7 years ago Posts: 4 |
Re: Delta calibration issues November 29, 2016 10:55AM |
Registered: 9 years ago Posts: 1,159 |
Quote
piglet_74
I had a thought about another problem measurement. For Smoothie, you need to input the horizontal length between the rod end centers. The diagonal is very easy to measure accurately. I couldn't figure out the horizontal though. Had a thought I'm going to try. Assuming my endstops are accurate, I'm going to home the machine. Then lower the effector down to in range of my caliper depth probe. then measure the distance from the bed to the rod end on the effector and then the bed to carriage rod end. I'll do this for all 3 sides. Possibly average the number. Then with an online calculator for right triangles, I can determine the bottom leg which is the horizontal I need. Then update the config and rerun my calibration and check a print for dimensional accuracy.
Does this sound reasonable. Thanks, Rob.
Re: Delta calibration issues November 29, 2016 02:50PM |
Registered: 10 years ago Posts: 97 |
Re: Delta calibration issues November 29, 2016 02:53PM |
Registered: 10 years ago Posts: 97 |
Re: Delta calibration issues November 29, 2016 03:40PM |
Registered: 10 years ago Posts: 14,672 |
Quote
andornot
Does anybody use PEI beds?
Re: Delta calibration issues November 30, 2016 05:33AM |
Registered: 8 years ago Posts: 66 |
Re: Delta calibration issues November 30, 2016 05:37AM |
Registered: 8 years ago Posts: 3,525 |