Re: Geeetech Rostock 301 first topic February 08, 2017 06:46AM |
Registered: 7 years ago Posts: 3 |
Re: Geeetech Rostock 301 first topic February 08, 2017 06:51AM |
Registered: 7 years ago Posts: 12 |
Re: Geeetech Rostock 301 first topic February 08, 2017 08:19AM |
Registered: 7 years ago Posts: 236 |
Re: Geeetech Rostock 301 first topic February 08, 2017 01:52PM |
Registered: 7 years ago Posts: 3 |
Re: Geeetech Rostock 301 first topic February 08, 2017 01:55PM |
Registered: 7 years ago Posts: 12 |
Re: Geeetech Rostock 301 first topic February 08, 2017 02:57PM |
Registered: 7 years ago Posts: 41 |
Re: Geeetech Rostock 301 first topic February 08, 2017 05:46PM |
Registered: 7 years ago Posts: 3 |
Re: Geeetech Rostock 301 first topic February 08, 2017 05:57PM |
Registered: 7 years ago Posts: 41 |
Re: Geeetech Rostock 301 first topic February 24, 2017 07:22AM |
Registered: 7 years ago Posts: 13 |
Re: Geeetech Rostock 301 first topic February 24, 2017 02:13PM |
Registered: 7 years ago Posts: 41 |
Re: Geeetech Rostock 301 first topic March 05, 2017 11:38AM |
Registered: 7 years ago Posts: 13 |
Re: Geeetech Rostock 301 first topic March 05, 2017 11:51AM |
Registered: 7 years ago Posts: 13 |
Quote
raoulito9
Wow.
This is a clever design.
Someone else (extruder0), in a previous post showed how he replaced the extruders with a similar gearmotor system. The only problem was that is was quite expensive.
My prints are now corrects, i pushed the temp to 225 for PLA and kept the speed around 30 to 50 mm/sec.
Did you achieve good prints faster than that ?
Do you use PLA ?
My actual problem (no satisfying solution so far) is the retract, not efficient as it is with the diamond head.
Your solution is still very intersting, please share the links of your designs as soon as you'll have uploaded them on thingiverse !
Re: Geeetech Rostock 301 first topic March 08, 2017 05:40AM |
Registered: 7 years ago Posts: 2 |
Re: Geeetech Rostock 301 first topic March 08, 2017 12:45PM |
Registered: 7 years ago Posts: 13 |
Re: Geeetech Rostock 301 first topic March 08, 2017 01:09PM |
Registered: 7 years ago Posts: 236 |
Re: Geeetech Rostock 301 first topic March 08, 2017 04:40PM |
Registered: 7 years ago Posts: 2 |
Re: Geeetech Rostock 301 first topic March 11, 2017 08:33AM |
Registered: 7 years ago Posts: 41 |
Re: Geeetech Rostock 301 first topic April 25, 2017 10:16AM |
Registered: 9 years ago Posts: 2 |
Re: Geeetech Rostock 301 first topic May 31, 2017 06:33PM |
Registered: 6 years ago Posts: 9 |
Re: Geeetech Rostock 301 first topic June 01, 2017 06:55PM |
Registered: 6 years ago Posts: 9 |
Re: Geeetech Rostock 301 first topic June 01, 2017 08:33PM |
Registered: 7 years ago Posts: 236 |
Re: Geeetech Rostock 301 first topic June 02, 2017 01:15PM |
Registered: 6 years ago Posts: 9 |
Quote
L'ami René
Your solution at home does not work, the gear rotates, but the filament does not advance into the tube and the gear ends by grinding the filament and almost the sectioned.
Re: Geeetech Rostock 301 first topic June 05, 2017 01:34PM |
Registered: 7 years ago Posts: 13 |
Re: Geeetech Rostock 301 first topic June 05, 2017 03:40PM |
Registered: 7 years ago Posts: 41 |
Re: Geeetech Rostock 301 first topic June 06, 2017 01:33AM |
Registered: 7 years ago Posts: 236 |
Re: Geeetech Rostock 301 first topic June 07, 2017 01:08PM |
Registered: 6 years ago Posts: 9 |
Quote
raoulito9
I used metal extruders to get filament to advance, and that works well. i should have tried to remove some platic from stock ones.
Quote
raoulito9
You are right about speed (around 30 mm/s) and acell factor that needs to be drastically lowered on printer screen (I remember a real pain, to start from something like 3000 to reach the value of 100 with rotating button).
Re: Geeetech Rostock 301 first topic June 07, 2017 05:18PM |
Registered: 7 years ago Posts: 19 |
Re: Geeetech Rostock 301 first topic June 07, 2017 06:31PM |
Registered: 6 years ago Posts: 9 |
Quote
twwd
Will the Geeetech Rostock 301 work out of the box using just Thingaverse and CURA , and the SD Card only?
Re: Geeetech Rostock 301 first topic June 07, 2017 08:25PM |
Registered: 6 years ago Posts: 9 |
Quote
Alexander Amelkin
I verified all the belts and screws, I oiled the top pulleys and loosened their axis screws, I checked the tension and tried to make it identical on all axes.
All in vain. Still slanted.
Re: Geeetech Rostock 301 first topic June 07, 2017 09:23PM |
Registered: 7 years ago Posts: 19 |