[SOLVED] G29 Auto Bed Leveling Matrix not "in the middle" of printbed
Posted by Johnny1910
|
[SOLVED] G29 Auto Bed Leveling Matrix not "in the middle" of printbed June 17, 2016 10:11AM |
Hi all,
when I issue the G29 command on my Delta printer (it has an inductive sensor), it takes probes which are not in the middle of the bed, the probe area seems to be more like this (green area):
Has someone an idea why this is the case, and how i can correct this?
My config file is attached.
Edit: Solved. Had the probe offset wrong :/
Edited 2 time(s). Last edit at 06/17/2016 11:56AM by Johnny1910.
when I issue the G29 command on my Delta printer (it has an inductive sensor), it takes probes which are not in the middle of the bed, the probe area seems to be more like this (green area):
Has someone an idea why this is the case, and how i can correct this?
My config file is attached.
Edit: Solved. Had the probe offset wrong :/
Edited 2 time(s). Last edit at 06/17/2016 11:56AM by Johnny1910.
Sorry, only registered users may post in this forum.