Offered for Sale on EBay,
click here
RepRap Mendel Printed ABS Parts with Wades Extruder and Hobbed Bolt
All the printed parts required to build your RepRap Mendel, complete with Wade’s extruder. Every part is printed on one of our Mendel's using the EckerTech Inc. heated build plate (to prevent warping) and a .406mm nozzle (to improve definition and structural integrity).
Note: the pulley versions included in this package are the 3 nophead drive pulleys with the grub-screw modification and the nophead z-pulleys with bottom rim.
As an added bonus we are including the hobbed bolt for the Wade’s extruder.
Mendel Parts
Wades Extruder - close up view
Hobbed Bolt
Example prints to compare the .5mm nozzle versus the .406mm nozzle
Mike