Ok, so ebay auctions are done. And they all went for $46.
Ive got a couple left so i thought i would just offer them here for $45 and not have the ebay fees.
Shoot me a PM is anyones interested.
$5 shipping to USA
$15 shipping outside USA
heres the info from the auctions if anyone wants it
The parts are printed with a 0.4mm nozzle using Ultimachine natural PLA.
Printed on heated bed with kapton tape.
Includes:
1 - Motor Shaft Gear
1 - Motor shaft gear with setscrew by Nophead [
www.thingiverse.com]
1 - Driven Gear
1 - Extruder Body
1 - Idler Bracket
1 - Hobbed M8 Bolt with nuts and washers
3 - 608 Bearings
1 - M8 Shaft for idler pulley
4 - M4 Bolts
4 - M4 Washers
4 - M4 Wing Nuts
4 - Springs
You will need to provide a motor and mounting bolts to complete.
To use Nopheads Motor Shaft Gear you will need a M3 nut and a 6mm grub screw
I have cleaned up the main body and assembled to make sure it goes together. The small gear needs a D shaped shaft on the motor.
I WILL ship internationally, but eBay wont calculate it properly for me.
Shipping outside the US will be $15
PayPal Accepted
Please make sure you have a verified shipping address on file with PayPal before sending payment.