Welcome! Log In Create A New Profile

Advanced

Switch box for power supply.

Posted by Duckmang 
Switch box for power supply.
December 18, 2016 02:36PM
I've been content to just plug and unplug my power supply to power up / down my printer but cleaning out a forgotten shelf yesterday turned up a nice rocker switch. After a few minutes in FreeCAD I had a box drawn up for it. The switch sits in a 22 x 38 mm opening and a 50mm cube will just hold the switch, wires, and connectors. The back cover is recessed and requires a smidge of sanding for a tight press fit. The cover and recess are drawn the same size but when printing ends up ever so slightly over extruded.

If anybody wants to print this for themselves, STL files attached.
Attachments:
open | download - switchbox.jpg (556.7 KB)
open | download - switchbox bottom.jpg (541.7 KB)
open | download - switchbox.stl (575.9 KB)
open | download - boxcover.stl (3.6 KB)
Sorry, only registered users may post in this forum.

Click here to login