Stuff I printed
Posted by DeuxVis
|
Stuff I printed April 19, 2012 06:54AM |
I need a place to post pictures of things I printed, whether because I'm proud and want to show'em off, or because I need to communicate it to someone. Sounds like this forum fits that purpose, and as a bonus people like me who love to glance at pictures of prints will eventually enjoy it.
So here's a few parts I printed for Sp@ckler's TZ Huxley - sorry about the poor picture, the plastic is actually bright red (firetruck red from faberdashery).
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
So here's a few parts I printed for Sp@ckler's TZ Huxley - sorry about the poor picture, the plastic is actually bright red (firetruck red from faberdashery).
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed July 06, 2012 02:56AM |
Printed 4 raldrich's bar clamps for ifrisbie.
That's one of the first useful prints of my Prism.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
That's one of the first useful prints of my Prism.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed July 09, 2012 10:39AM |
Plate # 3 for michaelc
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed July 13, 2012 05:08PM |
And plate #2, Plate #1b & finally #1a. Funny how my camera makes fabberdashery firetruck red look pinky 
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed September 06, 2012 05:48AM |
Printed a mendelmax set for a fellow hacker.
Lilac pearl PLA and Silver ABS from diamond age. Will look good mounted on my friend black anodized profiles.
Edited 1 time(s). Last edit at 01/27/2014 05:41AM by DeuxVis.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Lilac pearl PLA and Silver ABS from diamond age. Will look good mounted on my friend black anodized profiles.
Edited 1 time(s). Last edit at 01/27/2014 05:41AM by DeuxVis.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed January 28, 2013 10:11AM |
The prism printed 2 parts sets for michaelc a third one is currently being printed.
Yellow translucent PLA is from Esunpla, the creamy one is faberdashery's glow in the dark (yellow I think).
On the left are :
1) with green tape : warped parts on first print attempt, I forgot that large asymmetrical parts sometimes need a heated bed even when done using PLA, especially during winter.
2) rejects from the yellow sets, due to that god-damn filament snapping so much...
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Yellow translucent PLA is from Esunpla, the creamy one is faberdashery's glow in the dark (yellow I think).
On the left are :
1) with green tape : warped parts on first print attempt, I forgot that large asymmetrical parts sometimes need a heated bed even when done using PLA, especially during winter.
2) rejects from the yellow sets, due to that god-damn filament snapping so much...
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed January 29, 2013 01:08AM |
And set #3 (faberdashery fire truck red) :
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed July 06, 2013 10:26AM |
Made a Double Fan Adapter for prusa i3 extruder - [www.thingiverse.com] - for Leski.
Video of first few layers [youtu.be]
There have been a problem with a few layers shifting mostly on the X direction, the hell if I know what happened there - especially since the printing head came back all well aligned after those few layers.
Hopefully it won't affect the item usability, apparently - from handling it - it seems it didn't change it strength.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Video of first few layers [youtu.be]
There have been a problem with a few layers shifting mostly on the X direction, the hell if I know what happened there - especially since the printing head came back all well aligned after those few layers.
Hopefully it won't affect the item usability, apparently - from handling it - it seems it didn't change it strength.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed September 28, 2013 01:59PM |
That's my second rostock mini set, this time for ax2013.
All printed using "Warpless" ABS from an ebay shop I can't remind of at the moment. Note that warpless really means it, only warps a bit less
Mounted extruder details :
Verifying that this bowden/jhead interface from [www.thingiverse.com] looks functional :
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
All printed using "Warpless" ABS from an ebay shop I can't remind of at the moment. Note that warpless really means it, only warps a bit less
Mounted extruder details :
Verifying that this bowden/jhead interface from [www.thingiverse.com] looks functional :
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed February 06, 2014 05:51AM |
Colin needed a replacement for this lock part - have no idea how you call those in English, around here it's a "gâche".
That part was no longer produced in those dimensions, so he designed it and learnt some Openscad doing so.
Then I printed a couple for him.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
That part was no longer produced in those dimensions, so he designed it and learnt some Openscad doing so.
Then I printed a couple for him.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed May 13, 2014 10:17AM |
Testing new ABS filament from Filament 3D
Big layer height - 0.35 mm - large parts, warping still stayed under control.
Trying to print a couple of Manus but only one made it, my bad for trying to touch one during the print...
The survivor still printed out nice then - 0.1 mm layers.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Big layer height - 0.35 mm - large parts, warping still stayed under control.
Trying to print a couple of Manus but only one made it, my bad for trying to touch one during the print...
The survivor still printed out nice then - 0.1 mm layers.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed January 15, 2015 07:59AM |
Printing another rostock mini set currently.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
|
Re: Stuff I printed January 25, 2015 09:13AM |
I got a new camera and it is very good for macro pictures - and thus showing how my prints are not so perfect that my old eyes would like to believe.
Here is the finished rostock mini set :
And here are some close-ups to show imperfections. Nothing that would prevent the part to be used, just not looking so good I'd like it to :
This one was easy to spot.
Those tiny warpings only happened in some of the ABS parts :
One print got interrupted - Repetier crashed. Luckily it was early during the print, and it can be useful to show the internals.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Here is the finished rostock mini set :
And here are some close-ups to show imperfections. Nothing that would prevent the part to be used, just not looking so good I'd like it to :
This one was easy to spot.
Those tiny warpings only happened in some of the ABS parts :
One print got interrupted - Repetier crashed. Luckily it was early during the print, and it can be useful to show the internals.
Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Sorry, only registered users may post in this forum.