Welcome! Log In Create A New Profile

How do I control a Japan Servo Co., Ltd stepper?

jenjenjen

How do I control a Japan Servo Co., Ltd stepper?
September 06, 2016 09:45PM

Registered: 7 years ago
Posts: 2

I've got a couple of 3 wire stepper motors and I have no clue how to run them. The wires are Blue Red and Yellow then a Green attached to the case. They are made by Japan Servo Co., Ltd. Thank YOU!

Reply Quote

Attachments:
open | download - IMG_3126 (1).JPG (91.9 KB)
open | download - IMG_3128.JPG (69.7 KB)

Dust

Re: How do I control a Japan Servo Co., Ltd stepper?
September 07, 2016 05:15AM

Admin
Registered: 13 years ago
Posts: 7,000

This looks to be a 3-phase stepper

These are not compatible with standard reprap drivers...

Going to need a 3-Phase Hybrid Stepping Motor Driver

Don't know if there is a 3-Phase Hybrid Stepping Motor Driver that plugs into RAMPS, suspect there isn’t. nothing like pololu modules anyways.
But if they use the standard step direction and enable lines that can be wired in to the pololu socket.

Reply Quote

jenjenjen

Re: How do I control a Japan Servo Co., Ltd stepper?
September 15, 2016 07:45PM

Registered: 7 years ago
Posts: 2

okay.. thank you smiling smiley