I'm using RUMBA TAURINO and MARLIN.
I have calibrated the AXIS_STEPS_PER_UNIT. The movement for z axis is fine, but for x and y axis, the stepper motor only move for 2mm, 10mm and 100mm.
My default DEFAULT_AXIS_STEPS_PER_UNIT is {80, 80, 400, 499}, these settings makes the movement way off.
When I calibrate it to {5, 4.70, 250, 499}, the z-axis moves just fine, but not for x and y-axis.
Solution anyone?
Thanks in advance.