Hello everyone my Z axis is somehow not moving and i tried to switch the motors and figured out, that that was not the problem so it has to be in the firmware.
I tried the same with x and y and those are working but z wont somehow. It seems like its blocking and then when i want to send a +1 or -1 mm signal from my Reptier-Host it just doesnt work in z direction.
So here is my Configuration.h file [
pastebin.com] id really apprechiate it if someone would check it or can send me his configuration.h file.
I am trying to only use the max endstops and those are working... (triggered when i push em otherwise they are open).
X and Y are also Homing but Z just doesnt. I really hope someone can help me
