So I recently picked up a thermaltake 430w psu for my prusa i3. Im not a super electrically inclined person but have learned a little through the process of building and lots of videos so I knew about the shorting of the green wire to the black wire to make the system have a load and supply power to the rest of its components, but when I do this it takes anywhere from 3-6 tries of the hard switch for the psu to supply power to the rest of the components throughout the printer. And I know that the system is on because if I run an led across the green to the black it is lit but nothing else works as well as the psu having a ringing noise. Its not that big of a deal because the system works and that is the main thing, but I just find it interesting that the psu almost needs to warm up in order to work when most computer supplies start right up with the hard switch. Any ideas of how to make this a one try go?
Thanks so much for your help!
Schmuck