Welcome! Log In Create A New Profile

Advanced

Does this also Melzi v2.0 for Huxley?

Posted by herisuprapto 
Does this also Melzi v2.0 for Huxley?
January 05, 2016 05:17AM
Because RepRap Pro already closed their shops, I want to buy Melzi v 2.0 here:[www.amazon.com]. Can I use it to Huxley?
Re: Does this also Melzi v2.0 for Huxley?
January 14, 2016 01:10AM
Probably; but have you considered upgrading to Duet electronics instead, as RepRapPro did for their Huxley kits?


Delta printer calibration calculator, mini IR Z probe, and colour touch screen control panel: [escher3d.com]

Large delta printer, and other 3D printer blog postings: [miscsolutions.wordpress.com]

Disclosure: I have a financial interest in sales of the Panel Due, Mini IR height sensor, and Duet WiFi/Duet Ethernet [www.duet3d.com].
Re: Does this also Melzi v2.0 for Huxley?
January 14, 2016 01:17AM
Any standard controller will work.

You just need to configure the firmware appropriately for the machine.

The only gotcha I know of is some have a external heated bed board, which need a 5v logic signal
Re: Does this also Melzi v2.0 for Huxley?
January 14, 2016 07:54PM
Right now I still want to try Melzi because I'm used to this, for example, when the wiring, but if I have a new printer so I could try Duet or other boards.

I've bought it, but in a different place, but the lights in heatbed no flickering and the surface becomes very hot, also out smoke in mosfet.
Sorry, only registered users may post in this forum.

Click here to login