Welcome! Log In Create A New Profile

Advanced

Melzi v2: Motor current on the z axis that is not 0,6V

Posted by herisuprapto 
Forum List Message List New Topic
herisuprapto
Melzi v2: Motor current on the z axis that is not 0,6V
December 16, 2015 11:49PM
My printer is Huxley, in Melzi V2, should the voltage should be 0,6V, then I measure if the voltage at the motor potentiometer on the z 0,1V, and the potentiometer was already I swivel maximum. What is the meaning of this situation? Can I fix it?

[reprap.org]

Edited 2 time(s). Last edit at 12/18/2015 01:50AM by herisuprapto.
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login