I've got a problem (what else ;-) )
I'm quite fresh to Skeinforge but got it to work with Repetier und my K8200.
But at the beginning the gcode retracts a lot of filament, so that nothing comes out the first three to four layers (depending on the model). With the vast amount of parameters it seems I lost the overview.
Where do I set the retraction parameters, especial during the star sequence.
Than in advance for help,
PS: Working with the last recent version of Skeinforge
This is my start.gcode:
M104 S195 ; set hotend temperature to 195
M190 S50 ; set hotbed temperature to 500
G28 ; go home
G92 ; use current position as zero
M109 S195 ; wait for hotend temperature
Edited 3 time(s). Last edit at 08/23/2014 11:09AM by EddyMI3d.