Hello,
I would like to ask you if someone has the next problem with skeinforge. When I slice the attached stl, the output code shows a typical seam where each layer starts/ends but there is a part where the start/end point are moved. I have jitter and clip disabled but it happens. I checked it with repetier host and clearly I can see that the problematic layers starts in different point because the first "segment" is divided in 2 smaller segments meanwhile ok layers startswith unique segment (picture2 is layer ok and picture0/picture1 shows the problematic layers) so it looks like the problem is in the gcode generation no?
I will appreciate any info about this issue.