Welcome! Log In Create A New Profile

Advanced

Skeinforge loops speed

Posted by radus 
Forum List Message List New Topic
radus
Skeinforge loops speed
November 12, 2012 05:53AM
Hello.

How to set a low speed for loops and perimeters, but leave the high speed infill?
Reply Quote
ahmetcemturan
Re: Skeinforge loops speed
November 12, 2012 06:30AM
loops will be printed at infill speed but perimeters can be set with perimeter feedrate..

Manufacturer of low tolerance Filaments PLA, ABS, ASA, PETG, TPU, PA, PVA,
[www.miafilament.com]
[github.com]
Reply Quote
radus
Re: Skeinforge loops speed
November 14, 2012 01:37AM
Maybe change the source code 'speed.py' so that the speed of the loops was the perimeter feedrate?
Reply Quote
ahmetcemturan
Re: Skeinforge loops speed
November 14, 2012 02:49AM
Why? You need to print the visible part relatively slower so it looks nicer, Th invisible parts (loops and fill) can be printed faster as small faults will just be hidden, saving time..

Manufacturer of low tolerance Filaments PLA, ABS, ASA, PETG, TPU, PA, PVA,
[www.miafilament.com]
[github.com]
Reply Quote
radus
Re: Skeinforge loops speed
November 14, 2012 04:03AM
Fast loops close to the perimeter and degrade edges.
Reply Quote
ahmetcemturan
Re: Skeinforge loops speed
November 14, 2012 05:24AM
I havent understood that. Can You be more descriptive? maybe with an STL file?

Manufacturer of low tolerance Filaments PLA, ABS, ASA, PETG, TPU, PA, PVA,
[www.miafilament.com]
[github.com]
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login