Bridge speed ratio of .6, but no feedrate change for bridge areas. Refering to that as a bug, not the overhang layer infill.
It looks to me that solid bridge layer is calculating from the extrusion width, not the total perimeter.
Running a .25 mm nozzle, 0.1 mm layer height, 6 perimeter loops, no overhangs layer to layer that are more than 1mm.
Printing a Wades extruder body with horizontal holes causing alot of solid layers with infill in direction turned on.
Checking effects of Overlap Removal Width value today.
Update: Overlap Removal Width doesn't seem to make a difference for overhang layers getting solid infill.
Edited 3 time(s). Last edit at 11/06/2012 11:20AM by Dirty Steve.